1. Lithium Ion Battery PacksAs we know, lithium-ion battery presents many advantages over similar products. Compared with NiMh battery, it is 30% smaller and 50% lighter. In addition, its energy density is one to two times that of NiMh battery, and its operating voltage (3.6V) is three times that of NiCd or NiMh battery.
    1. Lithium Polymer Battery PacksLithium polymer batteries can be used in many applications, such as cell phones, notebooks, mobile DVDs, cameras, PDA, mini CD-ROM devices, handheld terminals, electric vehicles, portable GPS, intelligent robots, electric skateboard, toy cars, lawn mowers, cotton pickers, field exploration tools, to name a few.
    1. LiFePO4 Battery PacksThe LiFePO4 battery pack uses olivine-structure lithium iron phosphate as the anode material. It has high capacity, stable charge/discharge performance, and withstands extreme temperature, overcharge, overdischarge, as well as short circuit. The LiFePO4 battery is also very safe as it will not catch fire or explode under misuse conditions.
    1. High Power Lithium Battery PacksThe allowable nominal capacity error among all single batteries could be over 5%. This makes it possible for each single battery to be fully charged without causing over-voltage. The under-voltage protection effectively prevents single battery from being damaged due to over-discharge.
    1. NiMh Battery Packs

      Thanks to good resistance to high temperature, our nickel metal hydride battery can operate over a wide temperature range.
      With low internal resistance, it allows high or ultra-high rate discharge.
      五人斗地主 There is little difference between products of the same type.

      + More
    1. NiCd Battery PacksIt is well known that memory effect is observed in NiCd battery. This effect causes the product to hold less charge. If it is recharged after being partially discharged, the product will lose its maximum capacity and "remember" the smaller capacity. Therefore, please completely discharge it before recharge.
    1. Electric Bike Battery PacksThe electric bike battery pack offers many outstanding features, such as light weight, high capacity, large discharge current, good safety, high uniformity, and long cycle life. In fact, the life of the product achieves 300 to 1000 cycles. This means the battery pack can be used for 1 to 2 years, even 3 years under proper use.

Custom Made Battery Packs

Custom made battery pack is a group of batteries manufactured according to the specific requirements of customers. It can be directly used in various devices to deliver a desired voltage or power density. Based on customer demands, our company can make rechargeable secondary batteries using appropriate cells, such as lithium ion, lithium polymer, LiFePO4, NiMH or NiCd rechargeable cells.

Generally, the following information should be provided to assist us in choosing the type of cell and determining the PCM (protective circuit module) design of the finished battery.
1. The nominal voltage of the desired battery
Upon request, the product can be configured in series. Single or multiple ones are available, for example, 3.7V(1S), 7.4V(2S), 11.1V(3S), 14.8V(4S), etc.
2. The operating current of the product
As per customer requirements, the product can also be configured in parallel. Single or multiple ones are possible.
3. The specific operating conditions of the product, such as charge current, continuous discharge current, maximum discharge current and discharge time, and operating temperature range.
五人斗地主 4. Size requirement

Designing the PCM based on the above information ensures safer use of the finished battery in all electronic products. Additionally, our engineers will recommend the ideal product if they know the device where the battery will be used.

Our company can also design the following battery package to meet different customer needs.
1. Simple package: The PVC heat-shrinkable tubing is simple and convenient to use. The cost is relatively low.
2. Plastic case package:
(1) Fully enclosed plastic case
(2) Frame type plastic case
(3) Cold injection plastic case: This type of case is usually used for NOKIA cell phone battery.
3. Metal case: It is commonly used for E-bicycle or large LiFePO4 battery pack.
If our existing plastic cases or metal cases can not suit customer needs, we can develop new ones. However, the case mould fee is covered by the customer.

五人斗地主Providing customers with quality products is our commitment. The use of advanced production equipment enables us to assure the quality of rechargeable lithium battery packs. We also utilize precise testing equipment to conduct regular sampling inspections of each model of product. Thus, the safety performance of our product is well guaranteed. In addition, premium quality materials including A grade quality cell and PCM are used to produce custom made battery packs.

Related Names
五人斗地主 Customized Assembled Battery Supplier | 3 cell lithium polymer battery | Cheap Mobile Phone Cell | Custom lithium car battery packs

GB?? ???? ??? ???? ???? ?????? ???? ???? ?????? ???